curl_easy_setopt - set options for a curl easy handle
#include <curl/curl.h>
CURLcode curl_easy_setopt(CURL *handle, CURLoption option, parameter);
curl_easy_setopt() is used to tell libcurl how to behave. By using the appropriate options to curl_easy_setopt, you can change libcurl's behavior. All options are set with the option followed by a parameter. That parameter can be a long, a function pointer, an object pointer or a curl_off_t, depending on what the specific option expects. Read this manual carefully as bad input values may cause libcurl to behave badly! You can only set one option in each function call. A typical application uses many curl_easy_setopt() calls in the setup phase.
Options set with this function call are valid for all forthcoming transfers performed using this handle. The options are not in any way reset between transfers, so if you want subsequent transfers with different options, you must change them between the transfers. You can optionally reset all options back to internal default with curl_easy_reset.
Strings passed to libcurl as 'char *' arguments, are copied by the library; thus the string storage associated to the pointer argument may be overwritten after curl_easy_setopt() returns. The only exception to this rule is really CURLOPT_POSTFIELDS(3), but the alternative that copies the string CURLOPT_COPYPOSTFIELDS(3) has some usage characteristics you need to read up on.
Before version 7.17.0, strings were not copied. Instead the user was forced keep them available until libcurl no longer needed them.
The handle is the return code from a curl_easy_init or curl_easy_duphandle call.
Display verbose information. See CURLOPT_VERBOSE(3)
Include the header in the body output. See CURLOPT_HEADER(3)
Shut off the progress meter. See CURLOPT_NOPROGRESS(3)
Do not install signal handlers. See CURLOPT_NOSIGNAL(3)
Transfer multiple files according to a file name pattern. See CURLOPT_WILDCARDMATCH(3)
Callback for writing data. See CURLOPT_WRITEFUNCTION(3)
Data pointer to pass to the write callback. See CURLOPT_WRITEDATA(3)
Callback for reading data. See CURLOPT_READFUNCTION(3)
Data pointer to pass to the read callback. See CURLOPT_READDATA(3)
Callback for I/O operations. See CURLOPT_IOCTLFUNCTION(3)
Data pointer to pass to the i/o callback. See CURLOPT_IOCTLDATA(3)
Callback for seek operations. See CURLOPT_SEEKFUNCTION(3)
Data pointer to pass to the seek callback. See CURLOPT_SEEKDATA(3)
Callback for sockopt operations. See CURLOPT_SOCKOPTFUNCTION(3)
Data pointer to pass to the sockopt callback. See CURLOPT_SOCKOPTDATA(3)
Callback for socket creation. See CURLOPT_OPENSOCKETFUNCTION(3)
Data pointer to pass to the open socket callback. See CURLOPT_OPENSOCKETDATA(3)
Callback for closing socket. See CURLOPT_CLOSESOCKETFUNCTION(3)
Data pointer to pass to the close socket callback. See CURLOPT_CLOSESOCKETDATA(3)
OBSOLETE callback for progress meter. See CURLOPT_PROGRESSFUNCTION(3)
Data pointer to pass to the progress meter callback. See CURLOPT_PROGRESSDATA(3)
Callback for progress meter. See CURLOPT_XFERINFOFUNCTION(3)
Data pointer to pass to the progress meter callback. See CURLOPT_XFERINFODATA(3)
Callback for writing received headers. See CURLOPT_HEADERFUNCTION(3)
Data pointer to pass to the header callback. See CURLOPT_HEADERDATA(3)
Callback for debug information. See CURLOPT_DEBUGFUNCTION(3)
Data pointer to pass to the debug callback. See CURLOPT_DEBUGDATA(3)
Callback for SSL CTX logic. See CURLOPT_SSL_CTX_FUNCTION(3)
Data pointer to pass to the ssl context callback. See CURLOPT_SSL_CTX_DATA(3)
CURLOPT_CONV_TO_NETWORK_FUNCTION
Callback for code base conversion. See CURLOPT_CONV_TO_NETWORK_FUNCTION(3)
CURLOPT_CONV_FROM_NETWORK_FUNCTION
Callback for code base conversion. See CURLOPT_CONV_FROM_NETWORK_FUNCTION(3)
CURLOPT_CONV_FROM_UTF8_FUNCTION
Callback for code base conversion. See CURLOPT_CONV_FROM_UTF8_FUNCTION(3)
Callback for RTSP interleaved data. See CURLOPT_INTERLEAVEFUNCTION(3)
Data pointer to pass to the interleave callback. See CURLOPT_INTERLEAVEDATA(3)
Callback for wildcard download start of chunk. See CURLOPT_CHUNK_BGN_FUNCTION(3)
Callback for wildcard download end of chunk. See CURLOPT_CHUNK_END_FUNCTION(3)
Data pointer to pass to the chunk callbacks. See CURLOPT_CHUNK_DATA(3)
Callback for wildcard matching. See CURLOPT_FNMATCH_FUNCTION(3)
Data pointer to pass to the fnmatch callback. See CURLOPT_FNMATCH_DATA(3)
Error message buffer. See CURLOPT_ERRORBUFFER(3)
stderr replacement stream. See CURLOPT_STDERR(3)
Fail on HTTP 4xx errors. CURLOPT_FAILONERROR(3)
URL to work on. See CURLOPT_URL(3)
Allowed protocols. See CURLOPT_PROTOCOLS(3)
Protocols to allow redirects to. See CURLOPT_REDIR_PROTOCOLS(3)
Proxy to use. See CURLOPT_PROXY(3)
Proxy port to use. See CURLOPT_PROXYPORT(3)
Proxy type. See CURLOPT_PROXYTYPE(3)
Filter out hosts from proxy use. CURLOPT_NOPROXY(3)
Tunnel through the HTTP proxy. CURLOPT_HTTPPROXYTUNNEL(3)
Socks5 gassapi service name. CURLOPT_SOCKS5_GSSAPI_SERVICE(3)
Socks5 gssapi NEC mode. See CURLOPT_SOCKS5_GSSAPI_NEC(3)
Bind connection locally to this. See CURLOPT_INTERFACE(3)
Bind connection locally to this port. See CURLOPT_LOCALPORT(3)
Bind connection locally to port range. See CURLOPT_LOCALPORTRANGE(3)
Timeout for DNS cache. See CURLOPT_DNS_CACHE_TIMEOUT(3)
OBSOLETE Enable global DNS cache. See CURLOPT_DNS_USE_GLOBAL_CACHE(3)
Ask for smaller buffer size. See CURLOPT_BUFFERSIZE(3)
Port number to connect to. See CURLOPT_PORT(3)
Disable the Nagle algorithm. See CURLOPT_TCP_NODELAY(3)
IPv6 scope for local addresses. See CURLOPT_ADDRESS_SCOPE(3)
Enable TCP keep-alive. See CURLOPT_TCP_KEEPALIVE(3)
Idle time before sending keep-alive. See CURLOPT_TCP_KEEPIDLE(3)
Interval between keep-alive probes. See CURLOPT_TCP_KEEPINTVL(3)
Enable .netrc parsing. See CURLOPT_NETRC(3)
.netrc file name. See CURLOPT_NETRC_FILE(3)
User and password. See CURLOPT_USERPWD(3)
Proxy user and password. See CURLOPT_PROXYUSERPWD(3)
Username. See CURLOPT_USERNAME(3)
Password. See CURLOPT_PASSWORD(3)
Login options. See CURLOPT_LOGIN_OPTIONS(3)
Proxy user name. See CURLOPT_PROXYUSERNAME(3)
Proxy password. See CURLOPT_PROXYPASSWORD(3)
HTTP server authentication methods. See CURLOPT_HTTPAUTH(3)
TLS authentication user name. See CURLOPT_TLSAUTH_USERNAME(3)
TLS authentication password. See CURLOPT_TLSAUTH_PASSWORD(3)
HTTP proxy authentication methods. See CURLOPT_PROXYAUTH(3)
Enable SASL initial response. See CURLOPT_SASL_IR(3)
XOAuth2 bearer token. See CURLOPT_XOAUTH2_BEARER(3)
Automatically set Referer: header. See CURLOPT_AUTOREFERER(3)
Accept-Encoding and automatic decompressing data. See CURLOPT_ACCEPT_ENCODING(3)
Request Transfer-Encoding. See CURLOPT_TRANSFER_ENCODING(3)
Follow HTTP redirects. See CURLOPT_FOLLOWLOCATION(3)
Do not restrict auth to original host. CURLOPT_UNRESTRICTED_AUTH(3)
Maximum number of redirects to follow. See CURLOPT_MAXREDIRS(3)
How to act on redirects after POST. See CURLOPT_POSTREDIR(3)
Issue a HTTP PUT request. See CURLOPT_PUT(3)
Issue a HTTP POST request. See CURLOPT_POST(3)
Send a POST with this data. See CURLOPT_POSTFIELDS(3)
The POST data is this big. See CURLOPT_POSTFIELDSIZE(3)
The POST data is this big. See CURLOPT_POSTFIELDSIZE_LARGE(3)
Send a POST with this data - and copy it. See CURLOPT_COPYPOSTFIELDS(3)
Multipart formpost HTTP POST. See CURLOPT_HTTPPOST(3)
Referer: header. See CURLOPT_REFERER(3)
User-Agent: header. See CURLOPT_USERAGENT(3)
Custom HTTP headers. See CURLOPT_HTTPHEADER(3)
Control custom headers. See CURLOPT_HEADEROPT(3)
Custom HTTP headers sent to proxy. See CURLOPT_PROXYHEADER(3)
Alternative versions of 200 OK. See CURLOPT_HTTP200ALIASES(3)
Cookie(s) to send. See CURLOPT_COOKIE(3)
File to read cookies from. See CURLOPT_COOKIEFILE(3)
File to write cookies to. See CURLOPT_COOKIEJAR(3)
Start a new cookie session. See CURLOPT_COOKIESESSION(3)
Add or control cookies. See CURLOPT_COOKIELIST(3)
Do a HTTP GET request. See CURLOPT_HTTPGET(3)
HTTP version to use. CURLOPT_HTTP_VERSION(3)
Ignore Content-Length. See CURLOPT_IGNORE_CONTENT_LENGTH(3)
Disable Content decoding. See CURLOPT_HTTP_CONTENT_DECODING(3)
CURLOPT_HTTP_TRANSFER_DECODING
Disable Transfer decoding. See CURLOPT_HTTP_TRANSFER_DECODING(3)
100-continue timeout. See CURLOPT_EXPECT_100_TIMEOUT_MS(3)
Address of the sender. See CURLOPT_MAIL_FROM(3)
Address of the recipients. See CURLOPT_MAIL_RCPT(3)
Authentication address. See CURLOPT_MAIL_AUTH(3)
TFTP block size. See CURLOPT_TFTP_BLKSIZE(3)
Use active FTP. See CURLOPT_FTPPORT(3)
Commands to run before transfer. See CURLOPT_QUOTE(3)
Commands to run after transfer. See CURLOPT_POSTQUOTE(3)
Commands to run just before transfer. See CURLOPT_PREQUOTE(3)
List only. See CURLOPT_DIRLISTONLY(3)
Append to remote file. See CURLOPT_APPEND(3)
Use EPTR. See CURLOPT_FTP_USE_EPRT(3)
Use EPSV. See CURLOPT_FTP_USE_EPSV(3)
Use PRET. See CURLOPT_FTP_USE_PRET(3)
CURLOPT_FTP_CREATE_MISSING_DIRS
Create missing dirs on the remote server. See CURLOPT_FTP_CREATE_MISSING_DIRS(3)
Timeout for FTP responses. See CURLOPT_FTP_RESPONSE_TIMEOUT(3)
CURLOPT_FTP_ALTERNATIVE_TO_USER
Alternative to USER. See CURLOPT_FTP_ALTERNATIVE_TO_USER(3)
Ignore the IP address in the PASV response. See CURLOPT_FTP_SKIP_PASV_IP(3)
Control how to do TLS. See CURLOPT_FTPSSLAUTH(3)
Back to non-TLS again after authentication. See CURLOPT_FTP_SSL_CCC(3)
Send ACCT command. See CURLOPT_FTP_ACCOUNT(3)
Specify how to reach files. See CURLOPT_FTP_FILEMETHOD(3)
RTSP request. See CURLOPT_RTSP_REQUEST(3)
RTSP session-id. See CURLOPT_RTSP_SESSION_ID(3)
RTSP stream URI. See CURLOPT_RTSP_STREAM_URI(3)
RTSP Transport: header. See CURLOPT_RTSP_TRANSPORT(3)
Client CSEQ number. See CURLOPT_RTSP_CLIENT_CSEQ(3)
CSEQ number for RTSP Server->Client request. See CURLOPT_RTSP_SERVER_CSEQ(3)
Use text transfer. See CURLOPT_TRANSFERTEXT(3)
Add transfer mode to URL over proxy. See CURLOPT_PROXY_TRANSFER_MODE(3)
Convert newlines. See CURLOPT_CRLF(3)
Range requests. See CURLOPT_RANGE(3)
Resume a transfer. See CURLOPT_RESUME_FROM(3)
Resume a transfer. See CURLOPT_RESUME_FROM_LARGE(3)
Custom request/method. See CURLOPT_CUSTOMREQUEST(3)
Request file modification date and time. See CURLOPT_FILETIME(3)
Do not get the body contents. See CURLOPT_NOBODY(3)
Size of file to send. CURLOPT_INFILESIZE(3)
Size of file to send. CURLOPT_INFILESIZE_LARGE(3)
Upload data. See CURLOPT_UPLOAD(3)
Maximum file size to get. See CURLOPT_MAXFILESIZE(3)
Maximum file size to get. See CURLOPT_MAXFILESIZE_LARGE(3)
Make a time conditional request. See CURLOPT_TIMECONDITION(3)
Time value for the time conditional request. See CURLOPT_TIMEVALUE(3)
Timeout for the entire request. See CURLOPT_TIMEOUT(3)
Millisecond timeout for the entire request. See CURLOPT_TIMEOUT_MS(3)
Low speed limit to abort transfer. See CURLOPT_LOW_SPEED_LIMIT(3)
Time to be below the speed to trigger low speed abort. See CURLOPT_LOW_SPEED_TIME(3)
Cap upload speed to this. See CURLOPT_MAX_SEND_SPEED_LARGE(3)
Cap download speed to this. See CURLOPT_MAX_RECV_SPEED_LARGE(3)
Max number of connection is connection pool. See CURLOPT_MAXCONNECTS(3)
Use a new connection. CURLOPT_FRESH_CONNECT(3)
Prevent subsequent connections from re-using this. See CURLOPT_FORBID_REUSE(3)
Timeout for the connection phase. See CURLOPT_CONNECTTIMEOUT(3)
Millisecond timeout for the connection phase. See CURLOPT_CONNECTTIMEOUT_MS(3)
IP version to resolve to. See CURLOPT_IPRESOLVE(3)
Only connect, nothing else. See CURLOPT_CONNECT_ONLY(3)
Use TLS/SSL. See CURLOPT_USE_SSL(3)
Provide fixed/fake name resolves. See CURLOPT_RESOLVE(3)
Bind name resolves to this interface. See CURLOPT_DNS_INTERFACE(3)
Bind name resolves to this IP4 address. See CURLOPT_DNS_LOCAL_IP4(3)
Bind name resolves to this IP6 address. See CURLOPT_DNS_LOCAL_IP6(3)
Timeout for waiting for the server's connect back to be accepted. See CURLOPT_ACCEPTTIMEOUT_MS(3)
Client cert. See CURLOPT_SSLCERT(3)
Client cert type. See CURLOPT_SSLCERTTYPE(3)
Client key. See CURLOPT_SSLKEY(3)
Client key type. See CURLOPT_SSLKEYTYPE(3)
Client key password. See CURLOPT_KEYPASSWD(3)
Enable use of ALPN. See CURLOPT_SSL_ENABLE_ALPN(3)
)Enable use of NPN. See CURLOPT_SSL_ENABLE_NPN(3)
Use identifier with SSL engine. See CURLOPT_SSLENGINE(3)
Default SSL engine. See CURLOPT_SSLENGINE_DEFAULT(3)
SSL version to use. See CURLOPT_SSLVERSION(3)
Verify the SSL certificate. See CURLOPT_SSL_VERIFYPEER(3)
CA cert bundle. See CURLOPT_CAINFO(3)
Issuer certificate. See CURLOPT_ISSUERCERT(3)
Path to CA cert bundle. See CURLOPT_CAPATH(3)
Certificate Revocation List. See CURLOPT_CRLFILE(3)
Verify the host name in the SSL certificate. See CURLOPT_SSL_VERIFYHOST(3)
Extract certificate info. See CURLOPT_CERTINFO(3)
Provide source for entropy random data. See CURLOPT_RANDOM_FILE(3)
Identify EGD socket for entropy. See CURLOPT_EGDSOCKET(3)
Ciphers to use. See CURLOPT_SSL_CIPHER_LIST(3)
Disable SSL session-id cache. See CURLOPT_SSL_SESSIONID_CACHE(3)
Control SSL behavior. See CURLOPT_SSL_OPTIONS(3)
Kerberos security level. See CURLOPT_KRBLEVEL(3)
Disable GSS-API delegation. See CURLOPT_GSSAPI_DELEGATION(3)
SSH authentication types. See CURLOPT_SSH_AUTH_TYPES(3)
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5
MD5 of host's public key. See CURLOPT_SSH_HOST_PUBLIC_KEY_MD5(3)
File name of public key. See CURLOPT_SSH_PUBLIC_KEYFILE(3)
File name of private key. See CURLOPT_SSH_PRIVATE_KEYFILE(3)
File name with known hosts. See CURLOPT_SSH_KNOWNHOSTS(3)
Callback for known hosts handling. See CURLOPT_SSH_KEYFUNCTION(3)
Custom pointer to pass to ssh key callback. See CURLOPT_SSH_KEYDATA(3)
Private pointer to store. See CURLOPT_PRIVATE(3)
Share object to use. See CURLOPT_SHARE(3)
Mode for creating new remote files. See CURLOPT_NEW_FILE_PERMS(3)
Mode for creating new remote dirs. See CURLOPT_NEW_DIRECTORY_PERMS(3)
TELNET options. See CURLOPT_TELNETOPTIONS(3)
CURLE_OK (zero) means that the option was set properly, non-zero means an error occurred as <curl/curl.h> defines. See the libcurl-errors(3) man page for the full list with descriptions.
If you try to set an option that libcurl doesn't know about, perhaps because the library is too old to support it or the option was removed in a recent version, this function will return CURLE_UNKNOWN_OPTION. If support for the option was disabled at compile-time, it will return CURLE_NOT_BUILT_IN.
curl_easy_init curl_easy_cleanup curl_easy_reset
This HTML page was made with roffit.